Many users and air compressor manufacturers often ignore the maintenance and repair of the screw air compressor chassis when maintaining the screw air compressor. In fact, the maintenance of the screw air compressor chassis is very important. The following Dongfangweier Compressor Editor will explain to you how to maintain the screw air compressor chassis:
1. First, stop the air compressor and let it stop. Wait until it is completely cooled and completely depressurized before starting the inspection;
2. Then open the chassis and check whether the balance iron pin is firm;
3. Check the bolts to see if they are loose;
4. Check the surface finish of the internal components to see if there is wear and tear;
5. Use a flashlight to illuminate the rotating parts to see if the gap is uniform and whether there is wear; then inspect the inside and outside of the chassis to see if there are cracks, and perform flaw detection if necessary.
6. Use a wrench to pry the connecting parts between the balance irons to see if these parts are loose or eccentric;
The above six steps are the maintenance methods for the screw air compressor chassis. Regular maintenance and repair of screw air compressors are very important. When maintaining the screw air compressor, don't forget to maintain the screw air compressor chassis!